SAFETY Control Center
Safety First
Health, Safety & Environment Compliance Dashboard for TATA Steel Joda East.
Mr. Ajit Kumar
Safety Supervisor - Joda East
TBM Audits
Daily Tracking
KYT Reports
Risk Assessment
Live Analytics
Real-Time Data
PDF Export
Official Formats
100%Compliance
FastApprovals
ZeroIncidents
TopSafety Rank
Site Inspections
Active
Mandatory PPE
Strict Policy
Emergency Line
7440037037
Safety Rules & Highlights
Standard Operating Procedure (SOP) - RLS Wagon Loading
Key Hazards
- Risk of slipping, tripping, or falling while checking tracks, which can cause hand and leg injuries.
- Danger of body parts (fingers, hands, head) getting crushed between the locomotive and the wagon.
- Hazards from extreme weather (heat, cold, rain) and risk of eye injuries from loco air pressure.
Operating Rules
- Always fill out the checklist and work permit before moving the locomotive.
- Keep the locomotive at a safe, controlled speed at all times.
- Use Motorola radios for clear communication; mobile phones are strictly prohibited during operation.
PPE & Safety Steps
- Always use good condition skid blocks and handle them properly.
- Never climb onto a moving locomotive under any circumstances.
- Clean slippery surfaces, use handrails, and always follow the "3-point contact" rule on stairs.
Special Protocols
- At night or in dark areas, always use a torch to ensure proper visibility before any movement.
- Keep your body away from the wagon when using the decoupling lever to avoid getting hit.
- The locomotive operator must stay seated inside the cabin unless it is absolutely necessary to step out.